If you are eager to know How to make a cold room efficient and what is the small cold storage cost, you will get to know everything here.
Undoubtedly, to achieve optimal levels of energy efficiency in cold rooms, the installer or maintainer has a great responsibility.
Energy efficiency is one of the most important challenges every time each of the cold rooms that we install is projected. The big problem not only lies in the use or choice of efficient equipment but also in:
- The design of the complete equipment
- The collectors
- The valve
- Selected isolates
- The layout of the installation
- The tightness tests carried out
- The quality of materials used
- Parameterization and regulations, adjustment registers
- The location of probes
- A correct diagnosis of the needs
- Detection and correction of refrigerant leaks
These are some of the factors where the execution of the installation intervenes and its impact on energy consumption can be decisive.
This blog is also worth reading for you:– cold storage units near me
Choosing a trusted installer:
The role of engineering, data collection, and the correct choice of a fully trusted installer in each of the phases of a project (design, execution, commissioning, and maintenance) directly affects the energy efficiency of the system. All of this leads to obtaining optimal energy performance in each project.
Community policies have long been aimed at drastically reducing emissions, both direct and indirect, of greenhouse gases into the atmosphere.
These policies seek as an objective, the promotion of energy efficiency in the facilities, without overlooking the climatic conditions and the particularities of each project, as well as the internal environmental requirements and profitability in terms of investment efficiency.
There are many keys to obtaining efficient savings in energy consumption and optimized use of equipment in a refrigeration installation.
Poor maintenance can raise your energy bill by 15%:
Let’s see the example about the correct charge of the refrigerant gas that will allow reducing the operating time of the equipment and in this sense will allow ensuring the correct suction and discharge pressures. Or, on the other hand, the defrost maneuvers that they should tend to obtain. adequate efficiency and not operate longer than necessary.
On the other hand, the example of a blocked condenser could increase discharge pressure and compressor inefficiency, or improper control adjustments, leading to increased consumption.
Therefore, the value of experience in installations, technical knowledge, and the understanding of the peculiarities of each singular system by the installer in order to maximize its performance. Also become key to obtaining levels of efficiency, online. of the needs of an increasingly demanding market.
Let’s see a simple example in which the incidence of 1ºC of condensation temperature is equivalent to 3% of electricity consumption.
A dirty condenser, covered with dust, in short, poorly maintained, would cause an upward alteration in the number of hours operating and in worse conditions, or, for example, incorrectly applied setpoint temperatures in a cold plant would generate several working hours of the compressors, high and completely inadequate. Correct monitoring of these parameters and their possible correction are essential.
This blog is also worth reading for you:– cold storage business cost in india
Small cold storage cost:
Now, let’s talk about the main part of our article – small cold storage cost?
If you will set up at least a 192 sq ft area, it will cost you around 13,37,000 INR. Including machinery cost, insurance cover, generator and accessories cost, tax and installation cost, and other miscellaneous costs.
